iDRAC Direct LED
indicator pattern
Condition
Solid green for two
seconds
Indicates that the laptop is connected.
Flashing green (on
for two seconds and
off for two seconds)
Indicates that the laptop connected is recognized.
Turns off Indicates that the laptop is unplugged.
Quick Sync indicator codes
Figure 6. Quick Sync indicator codes
1. Quick Sync status indicator 2. Quick Sync activation button
Power indicator pattern Condition
Slow blink Indicates that Quick Sync is waiting to be configured
from iDRAC.
Solid Indicates that Quick Sync is ready to transfer.
Blinks three times rapidly and then turns off Indicates that the Quick Sync feature is disabled from
iDRAC.
Blinks continuously when the mobile device
touches the antenna
Indicates data transfer activity.
Blinks rapidly five times and turns off for one
second when the activation button is pressed.
This pattern is repeated until the activation
button is pressed again.
Indicates that the Quick Sync hardware is not
responding properly. Reseat the bezel. If the problem
persists, see Getting help.
Off Indicates that the Quick Sync feature is turned off.
Use the activation button to activate it. If pressing the
activation button does not turn on the LEDs, it
17
