A SERVICE OF

logo

Figure 13. Removing and installing the system cover
1. system cover 2. latch
3. latch release lock
Related video
http://www.Dell.com/QRL/Server/PER730/Cover
Installing the system cover
Prerequisites
Ensure that you follow the Safety instructions.
Steps
1. Align the slots on the system cover with the tabs on the chassis.
2. Push the system cover latch down to move the system cover into the closed position.
The system cover slides forward and the tabs on the system cover engage with the slots on the
chassis. The system cover latch will lock into place when the system cover engages with the slots on
the chassis.
3. Turn the latch release lock clockwise to the locked position.
4. Install the optional bezel.
5. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
52