36D-Link DAP-1522 User Manual
Section 3 - Conguration
Add Trac Manager Rule
In Trac Manager Rule enter settings for each user of your network, using adequate IP (Client IP) or MAC address (Client MAC).
Set appropriate Ethernet to Wireless and Wireless to Ethernet speeds for the trac you want to regulate.
Enter a name for your new rule.
The IP address assigned to the client.
By assigning MAC addresses to the set of trac manager
rules, specic rules can be dened for individual devices.
Represents the available bandwidth for client data to be
forwarded from Ethernet to wireless, the suggested range
is 800 ~ 96000kbits/sec.
Represents the available bandwidth for client data to
be forwarded from wireless to Ethernet, the suggested
range is 800 ~ 96000kbits/sec.
Note: Normally the wireless connection transmits application data packets based on the wireless to Ethernet speed and
Ethernet to wireless speed. Users can treat the two speeds as system transmission bandwidth, where all applications will
share the whole system bandwidth based on assigned priorities. Note that the maximum amount of bandwidth that can be
used is the same as the set value of both speeds.
Name:
Client IP (optional):
Client MAC (optional) :
Ethernet to Wireless:
Wireless to
Ethernet:
