Maintenance and Transporting 60
Maintenance and Transporting
Checking the Print Head Nozzles
If you find that a printed image is unexpectedly faint or some dots
in the image are missing, checking the print head nozzles helps you
to identify the problem.
Follow the steps below to check the print head nozzles using the
control panel.
Note:
When the ! Error light is on and a message appears on the LCD panel to
prompt you to replace an ink cartridge or to indicate the ink is low, you
cannot clean the print head. In this case, replace the appropriate ink cartridge
first.
1. Make sure that A4 or Letter paper is loaded in the sheet feeder.
2. Make sure that this product is on, and the ! Error light is off.
3. Press the Setup Mode button to enter the Setup Mode.
4. Press the A or the l/r Select button repeatedly until 3.Nozzle
check appears on the LCD panel, and then press the x Color
button. This product starts printing.
