Maintenance and Transporting 64
7. After setting all of the alignment patterns, Head alignment
appears on the LCD panel again. If you want to continue the print
head alignment operation, press the x Color button to print the
alignment patterns again; otherwise, press the y Stop button.
Note:
Even if you press the y Stop button, the settings you made in step 5
remains saved.
8. Look at the alignment patterns. Find the pair of horizontal bars
with no dark or light band between them, and then select the
number of the pair using the numeric buttons.
9. Press the x Color button to register your selection.
10. If you want to continue the print head alignment operation, press
the x Color button to print the alignment patterns and repeat
steps 7 and 8. If you want to stop the print head alignment
operation, press the y Stop button.
After all patterns are set, the print head alignment operation is
completed.
Transporting This Product
If you need to transport this product, carefully repack it using the
original box (or a similar box that this product fits snugly into) and
packing materials as follows:
c
Caution:
❏ When storing or transporting this product, avoid tilting it,
placing it vertically or turning it upside down; otherwise ink
may leak from the cartridge.
❏ Leave the ink cartridges in their installed positions when
transporting this product; removing the cartridges for
transportation may damage this product.