Replacing Ink Cartridges 35
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. Once you start replacing
a cartridge, you must complete all the steps in one session.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
1. Make sure the Epson Stylus CX5000 Series all-in-one is on.
2. Make sure that the document cover is closed, then open the scanner.
Caution:
Do not open the scanner when the document cover is open.
3. Press and release the B ink button. The P On and B ink lights flash.
If one of the cartridges is low or expended, the CX5000 Series moves that
cartridge to the _ expended ink mark. Go to step 4.
If no cartridges are low or expended, the ink cartridge holder moves to the ink
replacement position. Go to step 4.
Note:
Do not hold down the
B ink button for more than 3 seconds or the printer will start
to clean the print head.
Caution:
Do not move the print head by hand; this may damage the CX5000 Series. Always
press the
B ink button to move it.
