Epson CX5000 Manual

A SERVICE OF

next previous

Replacing Ink Cartridges 39

13. Press the

B ink button. The CX5000 Series begins charging ink and the On

light starts flashing. This takes about one minute. When it’s finished, the

On

light stops flashing and remains on, and the

B ink light goes out.

Caution:

Never turn off the CX5000 Series while the On

light is flashing or you’ll waste ink.

If you removed a low or expended ink cartridge, you cannot reinstall and use the

cartridge.

Note:

If the

B ink light stays on (not flashing), the ink cartridge may not be installed

correctly. Press the

B ink button again and reinstall the ink cartridge until it clicks

into place.

If you replaced a cartridge while copying a document or photo, cancel printing and

make sure your original is still placed correctly on the document table. Then copy

your original again.