FENIX IMVICO
TK14 OPERATION MANUAL
38/65
[Notes]
•
This command is effective for all characters, except for HRI characters.
•
The vertical direction is the paper feed direction, and the horizontal direction is
perpendicular to the paper feed direction.
•
When characters are enlarged with different sizes on one line, all the characters on the
line are aligned at the baseline.
•
The
ESC !
command can also turn double-width and double-height modes on or off.
However, the setting of the last received command is effective.
[Default]
n
= <00>H
[Reference]
ESC !, APPENDIX A
GS ( A pL pH n m
[Name] Execute test print
[Format] ASCII GS ( A
pL pH n m
Hex 1D 28 41
pL pH n m
Decimal 29 40 65
pL pH n m
[Range] (
pL
+ (
pH
x 256)) = 2 (where
pL
= <02>H,
pH
= <00>H)
<30>H
≤
n
≤
<32>H
<31>H
≤
m
≤
<33>H
[Description] Executes a test print with a specified test pattern on a specified paper.
•
pL
,
ph
specifies (
pL
+(
ph
x256)) for the number of the bytes after
ph
(
n
and
m
).
•
n
specifies the paper to be tested.
n
Paper
<30>H
<31>H
<32>H
Paper roll
•
m
specifies a test pattern.
m
Test pattern
<31>H Hexadecimal dump
<32>H Printer status print
<33>H Rolling pattern print
[Details] This command has enabled only when processed at the beginning of a line.
•
After the test print is finished, the printer resets itself automatically. Therefore, data
already defined before this command is executed, such as user-defined buffer and print
buffer are cleared; and each setting returns to the default value.
GS L
nL nH
[Name] Set left margin
[Format] ASCII GS L
nL nH
Hex 1D 4C
nL nH
Decimal 27 76
nL nH
[Range] <00>H
≤
nL
≤
<FF>H
<00>H
≤
nH
≤
<FF>H
[Description] Sets the left margin using
nL
and
n
H.
•
The left margin is set to [(
nL
+
nH
x 256) x 0.125 mm].
[Notes]
•
This command is effective only when processed at the beginning of the line.
•
This commands affects text, graphic and bar code printing.
[Default]
nL
= <00>H,
nH
= <00>H
[Reference]
APPENDIX A
Printable area
Left margin
