67
CONVENTIONAL MODE OPERATION
The procedures in the following section
describes Conventional Mode operation. Each
conventional channel may be programmed with
one or more features such as Channel Guard or
telephone interconnect capability. Follow these
procedures if operating in a conventional system.
RECEIVING A MESSAGE
1. Turn the radio on by rotating the
ON/OFF/VOLUME contract clockwise from
the OFF detent position. After the radio has
passed the power-up self test an optional
tone will sound and the current System and
Group/Channel will be displayed. If the unit
does not pass the test, the display will be
blank.
2. Press the SHIFT/CLR/MONITOR button and
then use the SELECT buttons or
to select a Conventional system. Press
SHIF/CLR/MONITOR to exit from System
select.
3. Use the SELECT buttons or to
select the desired Channel. The radio is now
ready to receive messages.
