18 Genie GS-2668 RT & Genie GS-3268 RT Part No. 82233
Operator's Manual Second Edition ยท Third Printing
FUNCTION TESTS
Test the Horn
18 Push the horn button.
Result: The horn should sound.
Test the Up/Down Functions and the Function
Enable Switches
19 Start the engine.
20 Activate the platform up function.
Result: The platform should not raise.
21 Push and hold a function enable/speed select
button.
22 Activate the platform up function.
Result: The platform should raise.
23 Release the function enable button.
Result: The platform should stop raising.
24 Push and hold a function enable/speed select
button. Activate the platform down function.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.
Test the Steering
Note: When performing the steer and drive function
tests, stand in the platform facing the steer end of
the machine.
25 Press and hold the function enable switch.
26 Depress the thumb rocker switch on top of the
control handle in the direction identified by the
blue triangle on the control panel.
Result: The steer wheels should turn in the
direction that the blue triangle points on the
control panel.
9 Push and hold the function enable button and
activate the platform up function.
Result: The platform should raise.
10 Push and hold the function enable button and
activate the platform down function.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.
Test the Manual Lowering
11 Push and hold the function enable button and
raise the platform approximately 2 feet / 60 cm.
12 Push in the red Emergency Stop button to shut
off the engine.
13 Pull out the red Emergency Stop button to the
on position.
14 Push and hold the function enable button.
Activate the down function.
Result: The platform should lower. The descent
alarm will not sound.
15 Turn the key switch to platform control and
restart the engine.
At the Platform Controls
Test Emergency Stop
16 Push in the platform red Emergency Stop button
to the off position.
Result: No functions should operate.
17 Pull the red Emergency Stop button out to the
on position.
Result: The green power light should come on.
