Part No. 82233 Genie GS-2668 RT & Genie GS-3268 RT 3
Operator's Manual
Second Edition ยท Third Printing
SAFETY RULES
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds on the chassis and in the
platform when the machine is on a severe slope.
If the tilt alarm sounds:
Lower the platform. Move the machine to a firm,
level surface. If the tilt alarm sounds when the
platform is raised, use extreme caution to lower the
platform.
Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area exposed to
the wind will decrease machine stability.
Do not drive the machine on or near uneven terrain,
unstable surfaces or other hazardous conditions
with the platform raised.
Use extreme care and slow speeds while driving
the machine in the stowed position across uneven
terrain, debris, unstable or slippery surfaces and
near holes and drop-offs.
Do not alter or disable the limit switches.
Do not drive over 0.5 mph / 0.8 km/h with the
platform raised.
Models without outriggers: Do not raise the platform
unless the machine is on a firm, level surface.
Models with outriggers: Do not lower the outriggers
unless the machine is on a firm surface. Avoid
drop-offs, holes, unstable or slippery surfaces and
other possible hazardous conditions.
Models with outriggers: Do not raise the platform
unless the machine is level. Do not set the
machine up on a surface where it cannot be leveled
using only the outriggers.
Models with outriggers: Use common sense and
planning when lowering the outriggers on a slope.
The steer end outriggers must be lowered first.
Do not use the platform controls to free a platform
that is caught, snagged or otherwise prevented
from normal motion by an adjacent structure. All
personnel must be removed from the platform
before attempting to free the platform using the
ground controls.
