HandyTone-486 User Manual Grandstream Networks, Inc.
10
*4 (encoding for “:”) followed by the encoded port number. Following is a table of the
encoding scheme for the most commonly used characters:
F
00 0
01 1
02 2
03 3
04 4
05 5
06 6
07 7
08 8
09 9
*0 . (dot character)
*4 : (column character)
Examples:
If the target IP address is 192.168.0.160, the dialing convention is
Voice Prompt with option 47, then 192168000160
followed by pressing the “#” key if it is configured as a send key or wait for more than 5
seconds. In this case, the default destination port 5060 is used if no port is specified.
If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be:
Voice Prompt with option 47, then 192168001020*45062 followed by pressing the
“#” key if it is configured as a send key or wait for 5 seconds.
Currently, we do not support inter-domain IP to IP call like: john123@othervoip.com
5.2.3
Call Waiting and Flashing
Grandstream HandyTone Series allows user to flash to the third party when in
conversation:
• Call Waiting. If there is a incoming call, user will hear a special call waiting tone
every 4 seconds, user will also notice the Call Waiting Caller ID if the analog
phone supports CWCID feature.
