A SERVICE OF

logo

64 65
CE DECLARATION OF CONFORMITY
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the
environment in which it is used.
Operation of this instrument in residential areas could cause unacceptable
interferences to radio and TV equipment.
To maintain the EMC performance of equipment, the recommended
cables noted in the user's manual must be used.
Any variation introduced by the user to the supplied equipment may
degrade the instruments' EMC performance.
To avoid electrical shock, do not use this instrument when voltage at the
measurement surface exceed 24VAC or 60VDC.
To avoid damage or burns, do not perform any measurement in microwave
ovens.
External cables to be connected to the instrument should be terminated with
cable lugs.
pH AND ORP ELECTRODES
Hanna Instruments produces a wide range of pH and ORP electrodes specifically de-
signed for needs of industrial uses. For a complete list of available electrodes visit our
web site at www.hannainst.com or contact your dealer.
The below table lists all the Combination, Flat tip, PVDF-body, polymer filled electrodes
with Matching Pin, operating pressure: up to 6 bar (87 psi)
(*) Available with GP sensor type only
(**) Fluoride-resistant glass sensor (F
-
<2g/L, temperature<60°C, pH>2)
(***) Not for ORP electrodes