edge switch 2/16 service manual 3–1
3
Repair Information
isible Body Tag
This chapter describes the repair and repair-related procedures for the hp
StorageWorks edge switch 2/16 (edge switch 2/16), and associated field-replaceable
units (FRUs). These procedures are described:
• Obtaining log information at the hp StorageWorks ha-fabric manager (HAFM)
server.
• Displaying and using HAFM server views.
• Obtaining and interpreting port diagnostic and performance data, and performing
port diagnostic loopback tests.
• Swapping ports (S/390 mode only).
• Collecting maintenance data.
• Cleaning fiber-optic components.
• Powering the switch on and off.
• Performing an initial program load (IPL).
• Setting the switch online or offline.
• Blocking or unblocking Fibre Channel ports.
• Managing firmware versions.
• Managing configuration data.
• Installing or upgrading software.
Do not perform repairs until a failure is isolated to a FRU. If fault isolation was not
performed, refer to "
MAP 0000: Start MAP" on page 2-7.
