3–52 edge switch 2/16 service manual
Repair Information
f. Select Save this program to disk and click OK.
g. Ensure the correct directory path (c:\HafmData) is specified at the Save as
dialog box, and the correct file is specified in the File name field. Click Save.
The new software version executable file is downloaded and saved to the
HAFM server or PC hard drive.
h. If the executable file was downloaded to a PC (not the HAFM server), transfer
the firmware version file to the HAFM server by diskette or other electronic
means.
i. Go to step 5.
4. Insert the HAFM Applications CD-ROM into the CD-ROM drive of the HAFM
server.
5. At the HAFM server, click Start at the Windows task bar. The Windows
Workstation menu displays.
6. At the Windows Workstation menu, select Run. The Run dialog box appears.
7. At the Run dialog box, select directory path (hard drive or CD-ROM drive) and
filename of the executable file (
HAFM_ServerInstall.exe
) using the Browse
button. The directory path and filename display in the Open field.
8. Click OK. A series of message boxes appear as the InstallAnywhere third-party
application prepares to install the HAFM application software, followed by the
HAFM dialog box.
