Using IVI with LabWindowsTM/CVITM
53
•
•
•
•
•
•
3 Select the Code menu and click Insert Function Call to insert the function and
values into your program. Close the function panel. The
hp34401a_ConfigureMeasurement function appears in your program.
4 From the library tree, select Configuration, select Trigger, and click
ConfigureTrigger. The Configure Trigger function panel opens.
5 Set the trigger source to immediate, the trigger delay to 0.01 seconds, and the
instrument handle to session. Select and enter:
•
Immediate
from
the drop-down list in the Trigger Source field
•
0.01
in the Trigger Delay field
•
session
in the Instrument Handle field
6 Select Code and click Insert Function Call to insert the function and values into
your program. Close the function panel. The hp34401a_ConfigureTrigger
function appears in your program.
Set the Reading Timeout
1 From the library tree, select Measurement and click Read. The Read dialog
opens.
2 Set the value for Timeout to 1 second (1000 ms), and instrument handle to
session. Enter:
•
1000
in the Read field
