80
Chapter 8
•
•
•
•
•
•
if (FAILED(hr))
{
Display("\033[30;41m Bad return from
get_DCVoltage(&pDMMDCVolt) method\033[m\n");
}
hr = pDMMDCVolt->Configure(1.5, 0.001);
if (FAILED(hr))
{
Display("\033[30;41m Bad return from >Configure(1.5,
0.001) method\033[m\n");
}
8 To set the trigger delay to 0.01, select the DMM.cpp file from the PAWS Project
window.
9 In the DMM_Init() interface function, insert the following code below the line
Please insert your CEM driver code here:
hr = driver->get_Trigger(&pDMMTrig);
if (FAILED(hr))
{
Display("\033[30;41m Bad return from
get_Trigger(&pDMMTrig) method\033[m\n");
}
hr = pDMMTrig->Configure(Agilent34401TriggerSourceImmediate,
0.01);
if (FAILED(hr))
{
Display("\033[30;41m Bad return from
Configure(Agilent34401TriggerSourceImmediate, 0.01)
method\033[m\n");
}
hr = driver->get_Measurement(&pDMMData);
if (FAILED(hr))
{
Display("\033[30;41m Bad return from
get_Measurement(&pDMMData) method\033[m\n");
}
