Expanding the OmniBook
Using Plug-In Modules
50 User’s Handbook
Using Plug-In Modules
You can use any compatible plug-in module with the OmniBook module bay, such as
those listed below.
• DVD drive module.
• LS-120 SuperDisk drive module.
• Floppy drive module.
You can also attach the floppy disk drive to the parallel port with the optional floppy
drive cable. You can then use the module bay for a different plug-in module.
• 24X CD-ROM drive module.
• Second battery.
CAUTION
Do not remove a plug-in module without first notifying Windows. If you do not
take proper action, you could lose data.
To install hot-swap support
For Windows 95 or Windows 98, if a plug-in module icon is present in the taskbar, Agaté
Tioman “hot-swap” software is installed. If the icon is not present, you can install it using
the steps below.
The Agaté Tioman hot-swap software lets you disconnect most modules in the plug-in
bay without shutting down the computer and rebooting. (This software does not support
Windows NT.)
• Click Start, Programs, Agaté Tioman for HP, Setup, then follow the onscreen
instructions.
