A SERVICE OF

logo

Open as PDF
next previous
Expanding the OmniBook
Using Plug-In Modules
52 User’s Handbook
3. Slide the module release latch forward as far as it will go.
4. Gently move the release latch back until the module pops out.
5. Grasp the underside of the module firmly, and pull out.
6. With the latch in the open position, slide the new plug-in module into the OmniBook
until flush with the unit.
7. Close the module release latch.
If you have a CD-ROM drive or other module in the module bay, you can connect the
floppy disk drive to the parallel port. See the section “Using Plug-In Modules” in the
online Reference Guide.