A SERVICE OF

logo

Open as PDF
next previous
Expanding the OmniBook
Connecting External Devices
3-13
To insert a PC card into the lower slot
1. Turn over the OmniBook, release the two latches on the bottom of the slot tray,
and pull out the tray.
2. Lift or push the plastic spacer out of the tray. (Save the spacer in case you
remove the card later—it keeps dust and dirt from getting inside the case.)
3. Install the new card into the tray with its face up and its connector holes toward
the metal tabs at the end of the tray.
4. Slide the tray fully into the slot and secure its latches.
Read-Write Switch. If the card has a read-write switch, make sure it is in its “read-
write” position if you want to do data storage. If, on the other hand, you want to
protect data from being changed, set the switch to its “read-only” position.