10/10/03
APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 7
3.1.4. PCL output tray setting
Command
Esc&l#G (27)(38)(108)#(71) <1Bh><38h><6ch>#<47h>
Parameter
# denotes the output tray.
•
1: Select the printer face-down output tray.
•
3: Select #1 bin of the Mailbox unit.
•
4: Select #2 bin of the Mailbox unit.
•
5: Select #3 bin of the Mailbox unit.
•
6: Select #4 bin of the Mailbox unit.
•
7: Select #5 bin of the Mailbox unit. (except HL-3260)
•
8: Select #6 bin of the Mailbox unit. (except HL-3260)
•
9: Select #7 bin of the Mailbox unit. (except HL-3260)
•
10: Select #8 bin of the Mailbox unit. (except HL-3260)
•
11: Select #9 bin of the Mailbox unit. (except HL-3260)
•
12: Select #10 bin of the Mailbox unit. (except HL-3260)
Default = 1
Explanation
• This command selects the specified output tray, trays defined as Mailboxes are numbered from the bottom of
the unit upwards
• This command is ignored when the specified tray is not available.
• The PJL OUTBIN command is ignored when this command is executed.
• Refer to the Technical Reference Guide Section 4.1.2 ‘Output tray’ in Chapter 2 ‘PCL’.
3.1.5. PS output tray & mode setting
Command
<HL-2060>
# setoutputmode
<HL-2460/3260/7050>
<</BROutbinMode #>> setpagedevice
Parameter
#
•
0: Select the printer face-down output tray.
•
1: Select the stacker function.
•
2: Select the sorter function.
•
4~10: Select the printer face-down output tray.
•
11: Select #1 bin of the Mailbox unit.
•
12: Select #2 bin of the Mailbox unit.
•
13: Select #3 bin of the Mailbox unit.
•
14: Select #4 bin of the Mailbox unit.
•
15 Select #5 bin of the Mailbox unit. (except HL-3260)
•
16: Select #6 bin of the Mailbox unit. (except HL-3260)
•
17: Select #7 bin of the Mailbox unit. (except HL-3260)
•
18: Select #8 bin of the Mailbox unit. (except HL-3260)
•
19: Select #9 bin of the Mailbox unit. (except HL-3260)
•
20: Select #10 bin of the Mailbox unit. (except HL-3260)
Default = 0
