118
Chapter 5 Configuring the Proprinter III XL Emulation with Control Codes
FUNCTION ASCII CODE PAGE
Print Attributes (Continued)
Superscript/Subscript Printing ESC S
n
144
Superscript/Subscript Printing ResetESC T 145
Underline ESC –
n
146
Graphics
Bit Image Mode, Single Density ESC K
n1 n2
119
Bit Image Mode, Double Density ESC L
n1 n2
120
Bit Image Mode, Double Density
Double Speed ESC Y
n1 n2
121
Bit Image Mode, Quadruple DensityESC Z
n1 n2
122
Other Functions
Bell BEL 119
Characters 80-9F ESC 7 126
(Control Codes)
Characters 80-9F ESC 6 126
(Printable Symbols)
Deselect Printer ESC Q 22 128
Initialize Parameters ESC [ K
n1
NUL
n2 n3 n4 n5
134
Print Control Codes ESC \
n1 n2
141
Print One Control Code ESC ^
n
141
Select Attributes ESC [@
n1
NUL NUL NUL
n2 n3
142
Select Font (Print Mode) ESC I
n
143
Super-Set Commands ESC |};145
Unidirectional Printing ESC U
n
146
Backspace
ASCII Code BS
Hex Code 08
Dec Code 8
Purpose Moves the logical print head to the left one character space
toward the first character column.
Comment BS moves the character position indicator one character space
to the left at the current character pitch setting. The code is
ignored if the logical print head is positioned at the first character
column.
Example If you were to print five “T” characters, then two BS commands,
then two “=” characters, the output would look like the sample
below.
