204
Chapter 7 The Super-Set Commands
Form Length and Width
The following command sets the form length:
ASCII Code SSCC K L [i
n
][m
n
][l
n
] .
Hex Code SSCC 4B 4C [69
n
][6D
n
][6C
n
] 2E
Dec Code SSCC 75 76 [105
n
][109
n
][108
n
] 46
Comment The brackets indicate optional parameters in the command
string. Do not include the brackets in your command. Only one
parameter may be used per command.
where: i
n
sets the form length in inches.
n
is the number of inches and
can be any number of digits, but is limited by the maximum form
length.
m
n
sets the form length in millimeters.
n
is the number of
millimeters and can be any number of digits, but is limited by the
maximum form length.
l
n
sets the form length in number of lines.
n
is the number of
lines and can be any number of digits, but is limited by the
maximum form length.
. (period) is the command terminator.
The following command sets the form width:
ASCII Code SSCC K W [i
n
][m
n
][c
n
] .
Hex Code SSCC 4B 57 [69
n
][6D
n
][63
n
] 2E
Dec Code SSCC 75 87 [105
n
][109
n
][99
n
] 46
Comment The brackets indicate optional parameters in the command
string. Do not include the brackets in your command. Only one
parameter may be used per command.
where: i
n
sets the form width in inches.
n
is the number of inches and
can be any number of digits, but is limited by the maximum form
width.
m
n
sets the form width in millimeters.
n
is the number of
millimeters and can be any number of digits, but is limited by the
maximum form width.
c
n
sets the form width in number of characters.
n
is the number
of characters and can be any number of digits, but is limited by
the maximum form width.
. (period) is the command terminator.
Comment The form length and width can both be set in the same
command. The command format is as follows:
ASCII Code SSCC K L [i
n
][m
n
][l
n
] W [i
n
][m
n
][c
n
] .
Hex Code SSCC 4B 4C [69
n
][6D
n
][6C
n
] 57 [69
n
][6D
n
][63
n
] 2E
Dec Code SSCC 75 76 [105
n
][109
n
][108
n
] 87 [105
n
][109
n
][99
n
] 46
