![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/d/4c/d4ca533e-4438-49d3-b243-4b7bf83b4c42/d4ca533e-4438-49d3-b243-4b7bf83b4c42-bgf8.png)
232 iSeries and AS/400e System Builder
#5034 #5034 Migration Tower I
The #5034 Migration Tower I is a converted Model 620/S20/720 system tower with 10 possible disk positions and any
#5064/#9364 System Unit Expansion. It is used for migration of PCI and SPD cards, disk units, and removable media
devices along with any attached PCI/SPD towers.
See the Model 620 and S20 section of AS/400e RISC System Builder, REDP-0342, and 5.11, “AS/400e Models 720, 730,
and 740 features” on page 148, for supported cards and devices. Additional features can be ordered to use vacant card or
device slots in the #5034.
Select two (any combination) of the following HSL cable features for this tower:
#1460 - 3 m Copper HSL Cable
#1461 - 6 m Copper HSL Cable
#1462 - 15 m Copper HSL Cable
Select one of the following SPCN cables:
#1463 - 2 m SPCN Cable
#1464 - 6 m SPCN Cable
#1465 - 15 m SPCN Cable
#1466 - 30 m SPCN Cable
One JTAG-E cable (6 m) is included with the #5034.
One #14xx power cord must be specified (geography dependent).
Maximum: One
The #5034 is mutually exclusive with #5033, #5035, and #5077.
Supported by attachment to Models 820 and 830
The #5034 was withdrawn from marketing on 21 November 2003.
#5035 #5035 Migration Tower I
The #5035 Migration Tower I is a converted Model 620, S20, or 720 system tower with 15 possible disk positions and any
#5064/#9364 System Unit Expansion. It is used for migration of PCI and SPD cards, disk units, and removable media
devices along with any attached PCI/SPD towers.
See the Model 620 and S20 section of AS/400e RISC System Builder, REDP-0342, and 5.11, “AS/400e Models 720, 730,
and 740 features” on page 148, for supported cards and devices. Additional features can be ordered to use vacant card or
device slots in this tower.
Select two (any combination) of the following HSL cable features for this tower:
#1460 - 3 m Copper HSL Cable
#1461 - 6 m Copper HSL Cable
#1462 - 15 m Copper HSL Cable
Select one of the following SPCN cables:
#1463 - 2 m SPCN Cable
#1464 - 6 m SPCN Cable
#1465 - 15 m SPCN Cable
#1466 - 30 m SPCN Cable
One JTAG-E cable (6 m) is included with the #5035.
One #14xx power cord must be specified (geography dependent).
Maximum: One
The #5035 is mutually exclusive with #5033, #5034, and #5077.
Supported by attachment to Models 820 and 830
The #5035 was withdrawn from marketing on 21 November 2003.
#5057 #5057 Storage Expansion Unit (Ultra SCSI)
The #5057 Storage Expansion Unit provides space for up to 16 disk units on the #5077 Migration Tower II. The #5057 is
shipped on new order #5077s when migrating from a Model 640, S30, or 730 that does not have a #5055. When migrating
from a Model 640, S30, and 730 that has a #5055, the #5055 is converted to a #5057.
Feature conversions to #5057 remain available.