A SERVICE OF

logo

Open as PDF
next previous
Operation GPS1200 59
4.7 Operation with a Typical Configuration Set
)
The example given is for static operations.
Static operations
step-by-step
Step Description
1. Set up the equipment.
)
Always fill out a field record sheet for each point.
)
It is vital that the antenna height is measured correctly. Measure the height
at the beginning and at the end of the occupation.
2. Start the Survey application program.
3. SURVEY Survey Begin
<Job: Default>
<Coord System: WGS 1984>
<Codelist: <None>>
<Config Set:> Select a configuration set for static operations.
<Antenna: AX1202>
4. CONT (F1)