1240 ODD switch sub card for W700 and W700ds
For access, remove these FRUs, in order:
• “1010 Battery pack” on page 68
• “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage
converter” on page 70
• “1060 Palm rest or palm rest with ngerprint reader” on page 75
• “1090 Keyboard” on page 80
• “1130 Keyboard bezel and speaker assembly” on page 88
• “1140 Wireless USB adapter or Intel Turbo Memory Minicard” on page 93
• “1150 PCI Express Mini Card for wireless LAN/WiMAX” on page 94
• “1220 LCD unit and LCD cable cap” on page 113
• “1230 Structure frame” on page 118
Table 44. Removal steps of ODD switch sub card
Step Screw (quantity) Color
Torque
2
M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver
0.181 Nm
(1.85 kgfcm)
Cable routing: When you install the card, make sure that the cable connecting the system board and the card is
routed rmly as shown in this gure.
Chapter 9. Removing and replacing a FRU 121
