Setting up the network printer
Paper handling
Maintenance
Troubleshooting
Administration
Index
25
Printing
www.lexmark.com
Lexmark E320/E322 Printer
3 Verify that the protocol that you are trying to use is installed properly on the server.
(Hint: Start, Settings, Control Panel, Network, Protocols). Look for TCP/IP or DLC
(LexLink).
4 Issue a ping command to the print server.
ping
157.184.8.231
5 Establish an FTP session with the print server.
ftp
157.184.8.231
6 Using the FTP “put” command, print a file. The file you use with FTP can be in PCL or
PostScript emulations, PDF, HTML or any other language the printer understands. If
the file prints, this confirms the TCP/IP protocol is working properly in the MarkNet
print server.
put mytest.ps or
put mytest.txt
7 Reset both the print server and the printer.
8 If possible, shut down Windows NT Server and restart the server. There could be a
spooler problem that requires a restart.
9 Try printing again.
