A SERVICE OF

logo

Open as PDF
next previous
Diagnostic Information 2-33
4085-001
Attendance Message Description Action
81 Engine Code
CRC Failure
A representation of
the operator panel
when microcode to be
programmed in the
engine flash code
module has failed a
CRC check.
Press Go to clear the
message. The microcode
data is discarded and
must be re-transmitted
from the host computer.
Flushing Buffer A representation of
the operator panel
when the printer is
flushing a print job.
The interpreter is
flushing the currently
active job until an End
Of Job is found or until
no data has been
received on the active
host interface for 5
seconds.
This message is
commonly displayed
when the Lexgear
interpreter receives a
print job with data
corruption. It can also
be displayed when a
print job is sent to the
printer in PostScript or
PCL 5 emulations.
No buttons are active
while this message is
displayed.