6
10. Connect the power cord to the power outlet (Figure 10).
NOTE: If you have difficulty removing the cable cover, please push
the the cover up (towards the top of the monitor) in order to unhook
the cover from the stand, then remove, as shown in (Figure 11).
Handle with care when removing cable cover.
NOTE: If you use this monitor at AC125-240V, please refer to
Recommended Use section of this manual for proper selection of
power cord.
11. The vacation switch on the back side of the monitor must be turned
on (Figure 10). Turn on the monitor with the front power button and
the computer.
NOTE: The vacation switch is a true on/off switch. If this switch is
on the OFF position, the monitor cannot be turned on using the
front button. DO NOT switch on/off repeatedly.
Figure 10
Power Button
Vacation
Switch
OFF Position
ON Position
Figure 11
Display Setup - continued
