35
Misfeed in multi-purpose drawer
1. If available, unlatch the duplex
module, slide it to the left and gently
move the module away from the
machine. If the machine is not
equipped with a duplex module, open
the side cover.
2. Open the left cover of the stand/paper
drawer. Hold the knob and gently
open the cover. If the machine is not
equipped with a stand/ paper drawer,
open the left cover of the multi-
purpose drawer.
3. Remove the misfed paper. Be careful
not to tear the misfed paper during
removal. The paper may not be
extending out very far from inside the
machine but it must be removed. If
this is not possible, go to the next step.
4. Close the left cover of the stand/paper
drawer.
5. Gently close the duplex module. If the
machine is not equipped with a duplex
module, close the side cover. After
closing, confirm that the misfeed
message has been cleared and the
normal display appears. If misfed
paper is not found in step 3, refer to
“Misfeed in paper tray 1” on page 33
to remove the misfed paper.
