36
Misfeed in the stand/MPD and 2000 sheet paper drawer
For misfeed removal in the upper tray,
refer to the procedure Misfeed in the
multi-purpose drawer. For misfeed
removal in the lower large capacity tray,
follow the procedure below. Follow steps
1 to 4 of Misfeed in the multi-purpose
drawer before starting here.
1. If misfed paper is not found in step 1,
refer to Misfeed in paper tray 1. If
misfed paper is not found in steps 1
and 2, pull out the large capacity tray
(lower tray) and remove the misfed
paper.
2. Raise the paper guide and remove the
misfed paper. After removing the
misfed paper, be sure to return the
paper guide.
3. Gently close the large capacity tray.
Push the paper tray all the way into
the machine. Gently close the duplex
module.If the machine is not equipped
with a duplex module, close the side
cover.
4. After closing, confirm that the
misfeed message has been cleared and
the normal display appears.
