General Features
94 Features Guide
• SMDR (Station Message Detail Recording) records the detailed Timed Reminder
information and prints it out automatically when the Timed Reminder starts and it is
answered or not answered. This can be enabled or disabled by System Programming.
• It is possible to select whether or not SMDR prints out the Login / Logout status of
Extension Group, Incoming Group members and Phantom extensions by System
Programming.
• It is possible to select whether or not SMDR prints out the supplementary digits when the
call is made using an ISDN line by System Programming. However, if the call is made using
a memory dialing (Redial, One-Touch Dialing, etc.), SMDR prints out the supplementary
digits regardless of this setting.
Installation Manual References
• 2.8.3 Personal Computer/Printer
Programming Guide References
•2.5SystemTimer
– Call Duration Count Start Time
• 10.4 SMDR
– SMDR Connection
– Output Type
– Print out Error Information
– [Format] Page Length
– [Format] Skip Perforation
– [Duration Log] Outgoing Calls
– [Duration Log] Incoming Calls
– Print out Caller ID Information
– Print out DID Information
– Print out Incoming Call Start "RC" and Incoming Call Answer "AN" information
– Print out Timed Reminder Information
– Print out Account Code
– Print out LOGIN / LOGOUT
– Time Display Mode
– Print out supplementary digits (ISDN only)
• 10.6 System Parameters
– [Serial Interface Port] SMDR – Parity
– [Serial Interface Port] SMDR – NL Code
– [Serial Interface Port] SMDR – Word Length
– [Serial Interface Port] SMDR – Stop Bit
– [Serial Interface Port] SMDR – Baud Rate
• 10.7 System Time
Features Guide References
None
