A SERVICE OF

logo

Chapter 4 Hardware Settings
TI5VG Pentium VP3 ATX Motherboard User’s Manual 13
Chapter 4 Hardware Settings
The following sections describe the necessary procedures and proper
jumper settings to configure the TI5VG motherboard.
4.1 SW1(1-7): CPU Frequency Selector.........................................15
4.2 SW2(1-4): CPU Voltage Selector.............................................17
4.3 JP8: Clear CMOS Selection......................................................19
For the locations of the jumpers, refer to Figure 2 on the following page.
The following examples show the conventions used in this chapter
Jumper Open
Jumper Closed
Switch 1 and switch 2 are set to OFF.
Switch 3 and switch 4 are set to ON.