![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/e/ae/eae0fa5f-1a6d-4495-a5d6-3efb9a2a1c08/eae0fa5f-1a6d-4495-a5d6-3efb9a2a1c08-bg33.png)
Chapter 6 BIOS Configuration
TI5VG Pentium VP3 ATX Motherboard User’s Manual 47
6.7 PNP/PCI Configuration
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE INC.
PNP OS Installed : No CPU to PCI Write Buffer : Enabled
Resources Controlled by : Manual PCI Dynamic Bursting : Enabled
Reset Configuration Data : Disabled PCI Master 0 WS Write : Enabled
PCI Delay Transaction : Enabled
IRQ-3 assigned to : Legacy ISA PCI Master Read Prefetch : Enabled
IRQ-4 assigned to : Legacy ISA PCI#2 Access #1 Retry : Disabled
IRQ-5 assigned to : PCI/ISA PnP PCI Master 1 WS Write : Enabled
IRQ-7 assigned to : Legacy ISA PCI Master 1 WS Read : Disabled
IRQ-9 assigned to : PCI/ISA PnP
IRQ-10 assigned to : PCI/ISA PnP PCI IRQ Activated By : Level
IRQ-11 assigned to : PCI/ISA PnP PCI IDE IRQ Map To : PCI-Auto
IRQ-12 assigned to : PCI/ISA PnP Primary IDE INT# : A
IRQ-14 assigned to : PCI/ISA PnP Secondary IDE INT# : B
IRQ-15 assigned to : PCI/ISA PnP
DMA-0 assigned to : PCI/ISA PnP
DMA-1 assigned to : PCI/ISA PnP ESC : Quit
Ç
È
Å
: Select Item
DMA-3 assigned to : PCI/ISA PnP F1 : Help
PU/PD/+/- : Modify
DMA-5 assigned to : PCI/ISA PnP F5 : Old Values (Shift) F2 : Color
DMA-6 assigned to : PCI/ISA PnP F6 : Load BIOS Defaults
DMA-7 assigned to : PCI/ISA PnP F7 : Load Setup Defaults
PNP OS Installed
This field allows you to specify if the operating system installed in your
system is plug and play aware.
Note: Operating systems such as DOS, OS/2, and Windows 3.x do not
use PnP.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically. However, this capability needs you to use a PnP operating
system such as Windows 95. The default value is
Manual.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is
Disabled.
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
These fields allow you to determine the IRQ/DMA assigned to the ISA
bus and is not available to any PCI slot.