A SERVICE OF

logo

Administrator’s Guide for Polycom QDX 6000 Systems
4-3
Audio meter
The audio meters in the user interface allow you to identify left and right
channels. The meters also indicate peak signal levels. Set signal levels so that
you see peaks between +3dB and +7dB with normal speech and program
material. Occasional peaks of +12 dB to +16 dB with loud transient noises are
acceptable. If you see +20 on the audio meter, the audio signal is 0 dBFS and
the audio might be distorted.
To access the audio meter:
Go to System > Diagnostics > Audio > Audio Meter.