Managing the System Remotely
9-4
Setting Up SNMP
The Polycom QDX 6000 system sends Simple Network Management Protocol
(SNMP) reports to indicate various conditions.
To configure the Polycom QDX 6000 system for SNMP management:
1 Access the SNMP configuration screen either in the Polycom QDX 6000
web interface or on the Polycom QDX 6000 system. In the Polycom QDX
6000 Web interface, go to Admin Settings > Global Services > SNMP.
On the Polycom QDX 6000 system, go to System > Admin Settings >
Global Service > SNMP.
2 Configure these settings on the SNMP screen:
Setting Description
Enable SNMP
Allows administrators to manage the system remotely using
SNMP.
Read-Only
Community
Specifies the SNMP management community in which you
want to enable this system. The default community is Public.
Note:
Polycom does not support SNMP write operations for
configuration and provisioning; the read-only community string
is used for both read operations and outgoing SNMP traps.
Contact Name
Specifies the name of the person responsible for remote
management of this system.
Location Name
Specifies the location of the system.
System
Description
Specifies the type of video conferencing device.
