Using the TV’s Features
34 Chapter 3
Channels menu
selection
Channels menu
action buttons
Channels
You can customize the channel listing by enabling or
disabling the display of certain channels. For instance,
you may disable channels that you never watch. You can
restore disabled channels at a later point in time.
1. If the Guide Plus+ system isn’t on your screen, press
GUIDE on your remote control.
2. Press MENU to select the Menu bar.
3. Use the right and left arrows to highlight the
Channels menu selection.
4. Use the up and down arrows to select a channel.
Then use the Channels Menu Action Buttons as described
next.
Channels Menu Action Buttons
While browsing the Channels menu, the following Action
buttons appear:
• Cancel Press 1 on the remote to cancel any
changes you made since entering the Channels
Menu.
• Change Press 2 on the remote to change the
channel number for the highlighted channel line.
• On/Off Press 3 on the remote to toggle the state of
the channel between On and Off.
Setup
The Setup menu allows you to access the GUIDE Plus+ system setup information. To access the Setup option:
1. If the Guide Plus+ system isn’t on your screen, press GUIDE on your remote control.
2. Press MENU to select the Menu Bar.
3. Use the right arrow to highlight the Setup menu selection.
4. Use the up and down arrows to select Change system settings, Review options, or View demo.
• Change system settings Confirms the settings you completed in the GUIDE Plus+ system setup
are correct.
• Review options Displays the GUIDE Plus+ auto display options.
On Automatically displays the GUIDE Plus+ system when you press the ON•OFF button on the
remote control.
Off Disables the GUIDE Plus+ system from being displayed when you press the ON•OFF button on
the remote control.
• View demo Runs the GUIDE Plus+ system demonstration.
Note: If you have not completed your GUIDE Plus+ system setup, these options will not be available. A screen
will prompt you to complete your setup.
1569452A.03 Features 4/9/02, 12:57 PM34
