Chapter 1 13
Connections & Setup
Initial Setup
The first time you turn on your TV, you’ll be asked to set a few menu screens so that your TV will set up correctly.
Complete the following steps to set up your TV. The other options in the SET UP menu are explained in Chapter 4.
SELECT LANGUAGE
ENGLISH
ESPAÑ OL
FRANÇ AIS
NEXT
• [ , ] to move cursor
• [OK] to set
Select a Language
The first time you turn on the TV, the SELECT LANGUAGE menu appears on the
screen. If you want the on-screen menus to appear in English, press the OK
button on the remote control. If you want the on-screen menus to appear in a
different language, follow these steps.
1. Press the down arrow on the remote to highlight ESPANOL (Spanish) or
FRANCAIS (French).
2. Press OK to select the language.
3. Press the down arrow button to highlight NEXT, and press OK (a menu
appears asking you if you want to START AUTO PRESET?)
Note: If you need to change the language later, you can access this menu
from the Main menu - go to page 34 for instructions.
SELECT LANGUAGE
ENGLISH
ESPAÑ OL
FRANÇ AIS
NEXT
• [ , ] to move cursor
• [OK] to set
Auto Preset (Automatically Searching for Channels)
Auto Preset enables the TV to search for all of the channels that are viewable
through your cable TV connection or off-air antenna.
1. If you’ve connected your antenna or cable, press the OK button on the
remote (auto programming starts).
Note: If you want to stop the auto programming, press MENU.
When the search is complete the TV will automatically tune to the first channel
in the channel list.
PLEASE WAIT
AUTO PROGRAMMING
69
STOP:MENU
CONNECT ANTENNA OR CABLE
START AUTO PRESET?
NO :MENU
YES:OK
F27TF12.01 Setup 7/19/01, 3:38 PM13
