19
Speed Dialing
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
1-Touch Dialing (1 – 9)
ᮣ
In Standby mode, press and hold the number key (1 – 9)
corresponding to the desired Contact’s speed dial number.
Example:
To speed dial the Contact assigned speed dial 5, press and hold
.
2-Touch Dialing (10 – 99)
1. In Standby mode, enter the first digit of the desired
Contact’s speed dial number.
2. Press and hold the number key representing the second
digit.
Example:
To speed dial the Contact assigned speed dial 35, press then
press and hold .
3-Touch Dialing (100 – 999)
1. In Standby mode, enter the first two digits of the desired
Contact’s speed dial number.
2. Press and hold the number key representing the third digit.
Example:
To speed dial the Contacts entry assigned to speed dial 235, press
, press , then press and hold .
Voice Dialing
Your SCH-r330’s voice recognition let’s you speak phone
numbers and Contact names in a natural manner to call them.
Note:
End Calls Before relaunching the VoiceSignal voice recognition
software — When you use voice recognition to make a call, you must
end that call before you can use other Voice Commands. See “Voice
SVC” on page 58 for more information.
Voice Dialing Tips
•
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
Dialing a Contact Name
1. In Standby mode, press and hold until “Say a
command” appears in the display and plays through the
earpiece.
2. Say “Call” followed by the Contact’s first and last names.
Voice Dial repeats the name and dials the number.
Note:
If Voice Dial is unsure which name you said, it displays a choice list of
up to three names and prompts you with “
Did you say
?” followed by the
first name on the list. Say “
Yes
” to confirm the name, “
No
” to hear the
next name, or use the keypad to select the correct name from the list.
