CHAPTER 4
Control commands list
4-27
GS r
[Name] Transmit status
[Format] ASCII GS r n
Hex 1D 72 n
Decimal 29 114 n
[Range] n = 1, 2, 49, 50
[Description] Transmits 1 byte of status data using n as follows:
n Function
1, 49 Transmits paper sensor status
2, 50 Transmits drawer kick-out connector status
[Notes] • Each status is 1 byte.
• The status to be transmitted is as follows:
- Paper sensor status (n = 1, 49)
Bit Binary Hex Decimal Status
00 00 0 Paper near end sensor: paper adequate.
0, 1
11 03 3 Paper near end sensor: paper not present.
00 00 0 Paper end sensor: paper present.
2, 3
11 0C 12 Paper end sensor: paper not present.
4 0 00 0 Not used. Fixed to Off.
5,6 - - - Undefined.
7 0 00 0 Not used. Fixed to Off.
• The status to be transmitted is as follows:
- Drawer kick-out connector status (n = 2, 50)
Bit Binary Hex Decimal Status
0 00 0 Drawer kick-out connector pin 3 is LOW.
0
1 01 1 Drawer kick-out connector pin 3 is HIGH.
1-3 - - - Undefined.
4 0 00 0 Not used. Fixed to Off.
5,6 Undefined
7 0 00 0 Not used. Fixed to Off.
