Speed Control/On-Off Knob
1.:To turn machine 'On', place fingers on Speed Control/
On-Off Knob and pull out.
2. To turn machine 'OFF', push in Speed Control/On-Off
Knob. Never Leave The Machine Unattended Until It
Has Come To A Complete Stop.
The variable speed control may be adjusted to the
approximate speeds identified on the contro! panel. Sug-
gested speeds are identified under "Choice of Blade and
Speed". Turn the control knob clockwise (,_"_'_)
strokes per minute and counterclockwise (_"_)
to reduce the strokes per minute.
\,,.
Push
Rotate
3. To lock knob in 'Off' position, install a padlock through
the post above the knob as illustrated, and lock the
padlock. (Padlock is not supplied withthe saw.)
WARNING: For your own safety, always push the
knob 'Off' when machine is not in use, Also, in the
event of a power failure (all of your lights go out),
push knob 'Off'. 'Lockout' your knob with a padlock
as shown. This will prevent the machine from start-
ing up again when the power comes back on.
15
