Status Information
TPG60 User Manual 27
’Specifying the Data Format and the Printer via the
InterCon-NetTool’ Ö27
’Printing the Status Page via the InterCon-NetTool’ Ö28
’Printing the Status Page via an FTP Connection’ Ö29
’Printing the Status Page via the TPG60 Status Button’ Ö29
Specifying the Data Format and the Printer via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – General.
3. Select the desired data format from the Status page mode list.
4. Select the desired printer ID from the Status Page Printer list.
5. Click Save to confirm.
ª The settings are saved.
Specifying the Data Format and the Printer via the
InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – General from the navigation bar.
4. Select the desired data format from the Status page mode list.
5. Select Configuration – ThinPrint® from the navigation bar.
6. Tick Status Page Printer for the desired printer.
7. Click OK to confirm.
ª The settings are saved.
