Editing Recorded MDs
34
EN
Copying a track or disc title
You can copy a track or disc title to use it as a title of
another track or the disc title within a disc. Note that
you can also do this operation by using the controls on
the remote.
1 Press EDIT/NO to display “Edit Menu”.
2 Turn AMS (or press = or +) until “Name ?”
appears in the display and press AMS or YES.
3 Turn AMS (or press = or +) until “Nm Copy
?” appears in the display.
4 Press AMS or YES.
5 Turn AMS (or press = or +) to select “Disc”
to copy the disc title, or the track whose title you
want to copy and press AMS or YES.
If “No Name” appears in the display
The disc or the track has no name.
6 Turn AMS to select “Disc” for disc title or to
specify the track number to copy a title, and press
AMS or YES.
“Complete!!” appears for a few seconds to indicate
that the copying operation is completed.
If “Overwrite?” appears in the display
The disc or track you selected in Step 6 above has a
title. If you continue the title copying, press AMS or
YES.
To cancel title copying
Press EDIT/NO or p.
Labeling tracks and MDs with the remote
Z
1 Press NAME repeatedly until a flashing cursor
appears in the display, then do the following:
To label Make sure that the deck is
A track Playing, pausing, recording the
track to be labeled, or stopped after
locating the track to be labeled
An MD Stopped with no track number
appearing in the display
2 Select the character type as follows:
To select Press
Uppercase letters CHAR repeatedly until “Selected
ABC” appears in the display
Lowercase letters CHAR repeatedly until “Selected
abc” appears in the display
Numbers NUM repeatedly until “Selected
123” appears in the display
3 Press an alphabet/number button to enter a
character.
After you enter a character, the cursor shifts
rightward and waits for the input of the next
character.
You can change the character type at any time
during Step 3 (see Step 2).
Alphabet/number
buttons
r
6
)0
+=
pP·
NAME
CHAR
0/)
CLEAR
NUM
p
