Basic Operations
8
EN
With the label side up
With the arrow pointing this way
Recording on an MD
1
Turn on the amplifier and play the program source you want
to record.
2
Press .
The STANDBY indicator turns off.
3
Insert a recordable MD.
If the MD has a recorded material on it, the deck will
automatically start recording from the end of the last recorded
track.
4
Set INPUT to the corresponding input connector.
To record through Set INPUT to
DIGITAL IN DIGITAL
LINE (ANALOG) IN ANALOG
5
Set REC MODE to the mode you want to record in.
To record in Set REC MODE*
1
to
Stereo sound STEREO
Monaural sound*
2
MONO
*
1
If you switch REC MODE during recording or recording pause, recording
stops.
*
2
In the monaural recording, you can record about two times longer than in
the stereo recording.
Monitor audio during recording
Even if you set REC MODE to
MONO, the monitor signal does
not become monaural.
)
0
§
=+
fl pr
PHONE LEVEL
PHONES
MIN MAX
TIMER
DISPLAY/
CHAR
PLAY MODE
CONTROL A1
OFFREC PLAY
STANDBY
REC MODE
EDIT/NO YES
AMS
REC LEVEL
STEREO
MONO
INPUT
010
PUSH ENTER
DIGITALANALOG
32 68
475
When “REMOTE” appears in the
display
The deck is set to be operated from
the connected personal computer.
You cannot operate the deck from
the buttons on the front panel or
remote.
To use the buttons on the front panel
or remote, quit the MD editor
application, turn off the deck, then
turn it back on.
Note for European models
Be sure to set MAIN POWER on the
rear of the unit to ON before using
the unit.
