masterpage:Left
(3 column)
filename[F:\My Document\mds-
s50\4230403131\4230403131\423040313MDSS50U2\GB05OPE-U2.fm]
model name1[MDS-S50]]
[4-230-403-13(1)]
14
The Music Synchro-recording allows you to
automatically synchronize recording to the MD
deck with the playing of the selected program
source. The Track Marking Function, however,
will differ according to the program source. For
details, see “Marking track numbers while
recording” on page 10.
1 Dosteps1to5of“Recording to MDs”
on page 8.
2 Press MUSIC SYNC on the remote.
The deck changes to recording pause.
3 Start playing the program source.
Recording starts automatically.
Note
During Music Synchro-recording, Smart Space and
Auto Cut will operate regardless of their setting
(“S.Space On” or “S.Space Off”).
When the deck is connected to a Sony CD
player or Hi-Fi component system, you can
easily copy the contents of CDs to the MD
using the deck’s remote. Because the MD
remote operates both the MD deck and the CD
player or CD player section of the component
system, make sure to place the MD deck and the
CD player as close together as possible.
1 Turn on the amplifier and the CD player,
and select CD on the amplifier.
2 Dosteps2to5of“RecordingtoMDs”
on page 8.
3 Insert a CD into the CD player and
select the playing mode (Shuffle Play,
Program Play, etc.) on the CD player.
4 Press CD-SYNCHRO STANDBY on the
remote.
The CD player changes to play standby and
the MD deck changes to recording standby.
5 Press CD-SYNCHRO START on the
remote.
The deck starts recording and the CD player
starts to play.
The track number and elapsed recording
time of the track appear in the display.
If the CD player does not start
playing
Some CD players may not respond when you
press CD-SYNCHRO START
on the remote.
Press X on the CD player’s remote instead to
start play on the CD player.
Synchro-recording with
the audio component of
your choice
— Music Synchro-recording
Synchro-recording with a
Sony CD player
— CD Synchro-recording
