Recording to MDs
masterpage:Left
(3 column)
filename[F:\My Document\mds-
s50\4230403131\4230403131\423040313MDSS50U2\GB05OPE-U2.fm]
model name1[MDS-S50]]
[4-230-403-13(1)]
15
Operations you may want to do
during CD Synchro-recording
Tips
• You can use the remote of the CD player during CD
Synchro-recording.
• During CD Synchro-recording, track numbers are
marked in the following ways:
— When the CD player is connected to the
DIGITAL IN connector, track numbers are
automatically marked as they appear on the CD.
— When the CD player is connected to the
ANALOG IN jacks, track numbers are
automaticallymarkedwhen “T.Mark Lsync” has
been selected (page 10).
— When you resume recording after recording
pause, a new track number is automatically
marked, regardless of the track marking
parameter setting (“T.Mark Lsync” or “T.Mark
Off”).
• By reprograming the MD’s remote,you can use the
procedure aboveto perform synchro-recording with
a Sony video CD player.
Press number button 2 on the remote while pressing
down ?/1 on the remote. You can now operatethe
MD deck and the video CD player with theremote.
Tocontrol the CD player again, press number button
1 on the remote while pressing down ?/1 on the
remote.
Notes
• When performing CD Synchro-recordingwith a CD
player with a mode selector, be sure to set the
selector to CD1.
• When you record tracks from certain CD or multi-
disc players,the entire materialmay be recordedas a
single track.
To Press
Stop recording CD-SYNCHRO STOP on
the remote
Pause recording CD-SYNCHROSTANDBY
on the remote
Locate the next track to
be recorded during
recording pause
CD PLAYER ./> on
the remote
Resume recording after
pausing
CD-SYNCHRO START on
the remote
Check the remaining
recordable time on the
MD
DISPLAY
Press
To change the
deck to
And change the
CD player to
H Recording Play
x Recording pause Stop
X Recording pause Pause
