92 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
Configuring SNMP on the ELOM
The ELOM has a preinstalled SNMP agent that supports trap delivery to an SNMP
management application.
To use this feature, you must integrate the platform-specific MIBs into your SNMP
environment, tell your management station about your server, then configure the
specific traps.
Adding Your Server to Your SNMP Environment
Add your Sun server as a managed node using your SNMP management
application. See your SNMP management application documentation for further
details.
Configuring Receipt of SNMP Traps
Configure a trap in your ELOM. See “Managing Alerts” on page 78,or“Configuring
E-mail Notification” on page 30.
Managing SNMP User Accounts
You can add, delete, or configure SNMP user accounts from the CLI. By default,
SNMP v3 is enabled, and SNMP v1 and v2c are disabled.
Adding a User Account
To add an SNMP v3 read-only user account, enter the following command:
create /SP/AgentInfo/SNMP/user/username authenticationpassword=
password
To add an SNMP v1/v2c user account, enter the following command:
create /SP/AgentInfo/SNMP/communities/communityname
