(
Revision J
General Maintenance Procedures
2?
2?2?
2?
Failure to perform periodic checks will eventually create printing inconsistencies and lead to more serious problems.
Refer to the following information for a check list of cleanable items.
•
Wipe all external plastic components using a cloth and non-corosive cleaner
•
Remove paper dust from all internal components using compressed air or vacuum
•
Clean Carriage Shaft
•
Clean contact areas with alcohol
•
Remove all paper shavings from knife (if knife is an option)
•
Clean rubber cartridge wipers with alcohol
?
? ?
?
The following information will answer some commonly asked questions about adjusting the POSjet
®
1500. Due to
the POSjet
®
1500’s design, the need to adjust components is limited to only two areas that may require periodic
attention. Generally, the time duration between adjustments is dependant on the operational conditions for each unit.
TransAct recommends that all adjustments are made by a service technician who has completed training on the
POSjet
®
1500.
