Revision J
Rev A Initial Release.
Rev C Pg 33 updated item #2 p/n
Rev D Pg 26 added item #28 & 29
Rev E Pg 2 updated view & item #’s in chart to only show complete Interface Bd/Bracket Assemblies/Kits as purchased
Rev F Pg 28 added item #24 (Driveframe Bearing)
Rev G Pg 28 updated item #1 p/n (Screw); Pg 6 removed “buzzer” option
Rev H Pg 22 updated item #11 p/n
Rev J Added RoHS part numbers to the Spare Parts Lists
NOTICE TO ALL PERSONS RECEIVING THIS DOCUMENT:
The information in this document is subject to change without notice. No part of this document may be reproduced,
stored or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express
written permission of TransAct Technologies, Inc. ("TransAct"). This document is the property of and contains
information that is both confidential and proprietary to TransAct. Recipient shall not disclose any portion of this
document to any third party.
TRANSACT DOES NOT ASSUME ANY LIABILITY FOR DAMAGES INCURRED, DIRECTLY OR
INDIRECTLY, FROM ANY ERRORS, OMISSIONS OR DISCREPANCIES IN THE INFORMATION
CONTAINED IN THIS DOCUMENT.
Some of the product names mentioned herein are used for identification purposes only and may be trademarks and/or
registered trademarks of their respective companies.
TransAct, PowerPocket, Magnetec, Insta-Load, POSjet, Ithaca, 50Plus, BANKjet and "Made to Order. Built to Last"
are registered trademarks and KITCHENjet is a trademark of TransAct Technologies, Inc.
©
2007 TransAct Technologies, Inc. All rights reserved.
Revision J, November 2007
Printed in USA.
The POSjet® 1500 Printer complies with the limits for a Class B computing device in accordance with the
specifications in Part 15 of FCC rules. These regulations are designed to minimize radio frequency interference
during installation; however, there is no guarantee that radio or television interference will not occur during any
particular installation. Interference can be determined by turning the equipment off and on while the radio or
television is on. If the printer causes interference to radio or television reception, try to correct the interference by
one or more of the following measures:
•
Reorient the radio or television receiving antenna
•
Relocate the printer with respect to the receiver
•
Plug the printer and receiver into different circuits
If necessary, the user should consult their dealer or an experienced radio/television technician for additional
suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful:
How to Identify and Resolve Radio/TV Interference Problems. This booklet is available from the US Government
Printing Office, Washington, DC 20402. Ask for stock number 004-000-00345-4.
The POSjet® 1500 Printer does not exceed Class A limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications.
EMI: FCC Class B
Safety: UL (US)
CUL (Canada)
CE Marking: CLASS B: EN55022, EN50081-1 (optional)
Safety: TUV
Other: CB Certificate
