,
Revision J
Assembly and Disassembly
#
##
#+)*
+)*+)*
+)*
Before disassembling any part of the printer, be sure the power is turned off. Disconnect the AC power cord, the
communication cable, and the cash drawer cables. Controller board and keypad PC board can be damaged by static
electricity. Observe ESD precautions. Wear a grounded wrist strap, and use a static mat or other protected work
surface. Do not place the printed circuit boards directly on the printer or floor.
*
Using the wrong tools may cause personal injury or damage the printer. Be sure to use the proper tools when
maintaining or servicing the printer. The following list provides the necessary tools to properly maintain the
POSjet® 1500 Printer.
•
Screwdrivers
•
#0 Phillips
•
#1 Phillips
•
#2 Phillips
•
Small Flat Blade Screwdriver
•
Large Flat Blade Screwdriver
•
Nut Drivers
•
Small Needle-Nose Pliers
